AE-Single Stage End Suction Centrifugal Pump

The AE-Single Stage End Suction Centrifugal Pump adopts EN733, DIN24255, ISO2858, GB5656, and GB5657 standards, connected 

by DIN2501 PN16 and GB/T17241.6 PN16 flanges. ANSI and JIS flanges are also optional.

By now these pumps are well-sold in Russia, USA, Canada, Uzbekistan, Kazakhstan, Africa, Southeast Asia, India,Mid-East etc.

This series of horizontal single-stage end-suction centrifugal pumps can transport clean water and liquids with physical and 

chemical properties similar to water, free of solid particles. They are widely used in factories, mines, urban water supply and 

drainage, fire-fighting water supply, and agricultural irrigation.

Performance parameters of pumps of the same specification can be varied by cutting the impeller outer diameter: the 

pump's standard speeds are 1450 RPM and 2900 RPM. For operation at a maximum speed of 3550 RPM (60Hz power supply 

or with gasoline or diesel engines), technical guidance will be provided by our company for changing the impeller outer diameter.

The AE type pump features a simple structure, reliable performance, small size, high efficiency, good cavitation resistance,

 low power consumption, and convenient use and maintenance.

Pump body materials available include: HT250, QT400, s.s.304 , s.s.316, and duplex stainless steel 2205,1.4460 

Impeller materials available include: HT250, 65 copper/85 copper, s.s.304 , s.s.316, and duplex stainless steel 2205,1.4460 

The pump is suitable for conveying media temperatures from -10°C to 85°C and operating pressures up to 1.6 MPa.

 For pressures of 2.5 MPa or higher, please specify when selecting and ordering.

It can be installed with any brand of IEC standard motor.

Diameter: Inlet 50~350mm, Outlet 32~300mm

Flow Rate: 4~1440 m³/h

Head: 3~150m

Operating Pressure: Standard 1.0MPa, optional 1.6MPa

Medium Temperature: -15℃~85℃ (85℃~120℃)

Parameter Range:

Performance Range: Performance similar to SIHI-Nowa, KSB-Etanrom, Wilo-NL series.